Auto Edge Banding Machine FEB 260 PRE (HIGH SPEED)

FEB -460PRE

The Auto Edge Banding Machine FEB 260 PRE (HIGH SPEED) is a state-of-the-art solution engineered for high-volume, high-precision edge banding in modern woodworking and panel processing environments. Designed with advanced technology and user-friendly features, this machine delivers unmatched performance, speed, and reliability, making it the preferred choice for furniture manufacturers, modular kitchen makers, and interior solution providers.

TECHNICAL SPECIFICATIONS:

Description	Parameter
Edge Material Thickness	0.4 – 3 mm
Board Thickness	10 – 60 mm
Min Panel Length	≧ 120 mm
Min Panel Width	≧ 60 mm
Total Air Pressure	6 Bar
Feeding Speed	15 – 23 m/min
Power	21 HP (15.5 kW)
Packing Size	5520 × 970 × 1800 mm
Control	PLC Touch Control
Size of Dust Hood	100 mm Dia × 5 nos

Features

Equipped with pre-milling for superior edge bonding and finish.
High-speed feeding up to 23 meters per minute for efficient production.
Handles edge thickness of 0.4–3 mm and board thickness of 10–60 mm.
User-friendly PLC touch control system for smart operation.
Powerful 21 HP motor ensures robust and consistent performance.
Fitted with 5 dust hoods (100 mm dia) for effective dust extraction.

FEATURES:

S.No	Function	Detailed Description
1	TOUCH SCREEN:	10-inch high-definition large screen The industry-leading touch screen “DELTA”, fast response, no accidental touches.
2	PRE-MILLED FUEL PUMP	Specially oiled to pre-milled guide rails.
3	PRE –MILLING	The jointing unit is equipped with two high-frequency motors, which ensures high-quality processing of the end face of the material before gluing the edge. The diamond pre-mill removes the ripple marks of the board’s edge, the excess burrs, so that the edge of the board more closely to the edge banding.
4	PRE-HEATING LAMP	The pre-heating lamp instantly heats the end face of board for better adhesion. There is poor glue sealing due to cold material in winter and preheating solves this problem.
5	SIX ROLLERS OF PRESSING	One large, four medium and one silicon rubber coated pressing wheel with intergrated glue cleaning mechanism. 6 Roller of pressing and sticking are more precise than 4 Rollers, the glue line is slight and does not run away from the tape. Firm fit, thick and thin tape can easily go with the cylinder control. The pneumatic cylinder can control the glue door, the glue quantity is stable, and the thickness is even. The rollers are equipped with a glue cleaning mechanism.
6	END CUTTING	Cuts off the excess edge banding at both ends of the flush plate (the cylinder is equipped with 2 pressure regulating valves and 1 pressure relief valve). The air pressure is more stable, and the pressure is more stable.
7	ROUGH TRIM	Adjust the knife using the digital meter, which is simple and easy to set. The six-edged alloy flat knife trims off the excess edges.
8	FINE TRIM	The six-edged R knife trims off the excess sealing top & Bottom tape to form rounded corners, trimming more beautiful.
9	SCRAPING(CLEANING AGENT)	Super hard alloy R knife scrapes the fine lines of the edging strip to make it round and smooth.
10	BUFFING UNIT	The cloth wheel quickly polishes the edges of and panel, excellent edge cleaning-polishing with two Independent motors.
11	CENTRALIZED LUBRICATION SYSTEM	Automatic timed injection of oil maintenance, multi-lube connection to all trimming units moving parts. Preventive lubrication minimizes wear on the machine and increases its lifespan.
12	CLEANING DEVICE	Pre-Isolation (Separating Agent) and Post-Cleaning (Cleaning Agent) Cleaning board’s residual glue, adjustable spray volume size by adjustable nozzle, easy to use.
13	CLAMPING MOVEMENT MECHANISM	The mechanism for lifting/lowering the clamping traverse is equipped with an electric drive, which ensures fast and accurate installation to the required thickness of the part.
14	EDGE BANDING EFFECT	The edge sealing effect of the edge banding strip is smooth and beautiful, with good wrapping properties and perfect chamfering.