Auto Edge Banding Machine FEB 460 PRE

FEB -460PRE

The Auto Edge Banding Machine FEB 460 PRE is a premium high-speed solution engineered to meet the demands of modern woodworking and modular furniture production. With its robust construction, intelligent control system, and integrated pre-milling functionality, this machine ensures flawless edge application, high productivity, and a seamless finish on every panel.

Technical Data

Description	Parameter
Edge Material Thickness	0.4 – 3 mm
Board Thickness	10 – 60 mm
Min Panel Length	≧ 120 mm
Min Panel Width	≧ 60 mm
Total Air Pressure	6 Bar
Feeding Speed	15 – 23 m/min
Electrical Lifting	0.5 HP (0.37 KW)
Power	22 HP (16.5 KW)
Packing Size	6800 × 970 × 1800 mm
Control	PLC Touch Control

Features

High-speed feeding at 15–23 meters per minute for maximum productivity.
Handles edge material thicknesses ranging from 0.4 to 3 mm for versatility.
Accommodates board thicknesses between 10 and 60 mm, ideal for a wide range of projects.
Equipped with PLC Touch Control for easy operation and precise adjustments.
Powerful 22 HP (16.5 KW) motor ensures consistent performance in high-demand environments.
Includes an integrated dust extraction system with four 100 mm dust hoods for a cleaner workspace.

Products Details

S.No	Function	Detailed Description
1	TOUCH SCREEN	The industry-leading touch screen in the woodworking industry, fast response, and no accidental touch
2	ANTI-PINCH DEVICE	If you accidentally touch the anti-pinch device during work, the whole machine will alarm and stop, it acts as a safety protection.
3	CONVEYOR ENCODER	The pulse encoder replaces the limit switch, and each function can be controlled more accurately.
4	AIR PRESSURE PROTECTION DEVICE	When the air pressure is insufficient, the screen will display a low air pressure alarm, and the machine cannot be started. It prevents damage to the board.
5	PRE-MILLING FUEL PUMP	Specially oiled to pre-milling guide rails.
6	PRE–MILLING	The jointing unit is equipped with two high-frequency motors, which ensure high-quality processing of the end face of the material before glueing the edge. The diamond pre-mill removes the ripple marks of the board’s edge, the excess burrs, so that the edge of the board more closely to the edge banding.
7	PRE-HEATING LAMP	The pre-heating lamp instantly heats the end face of the board for better adhesion. There is poor glue sealing due to cold material in winter, and preheating solves this problem.
8	SIX ROLLERS OF PRESSING	One large, four medium, and one silicon rubber-coated pressing wheel with integrated glue cleaning mechanism. 6 rollers of pressing and sticking are more precise than 4 Rollers, the glue line is slight and does not run away from the tape. Firm fit, thick and thin tape can easily go with the cylinder control. The pneumatic cylinder can control the glue door, the glue quantity is stable, and the thickness is even. The rollers are equipped with a glue cleaning mechanism.
9	END CUTTING	Cuts off the excess edge banding at both ends of the flush plate (the cylinder is equipped with 2 pressure regulating valves and 1 pressure relief valve). The air pressure is more stable, and pressure is more stable.
10	ROUGH TRIM	Adjust the knife using the digital meter, which is simple and easy to set. The six-edged alloy flat knife trims off the excess edges.
11	FINE TRIM	The six-edged R knife trims off the excess sealing top & Bottom tape to form rounded corners, trimming more beautifully.
12	CORNER ROUNDING	Trimming the four corners after sealing into small arcs is more rounded and less harsh. Self-designed tracking action and air circuit design make the profiling chamfering action more stable.
13	SCRAPING	Super hard alloy R knife scrapes the fine lines of the edging strip to make it round and smooth.
14	BUFFING UNIT	The cloth wheel quickly polishes the edges of and panel, excellent edge cleaning-polishing with two Independent motors.
15	CENTRALISED LUBRICATION SYSTEM	Automatic timed injection of oil maintenance, multi-lube connection to all trimming units moving parts. Preventive lubrication minimizes wear on the machine and increases its lifespan.
16	CLEANING DEVICE	Pre-Isolation (Separating Agent) and Post-Cleaning (Cleaning Agent) Cleaning board’s residual glue, adjustable spray volume size by adjustable nozzle, easy to use.
17	NARROW BOARD AUXILIARY WHEELS	Installation of auxiliary levelling wheels at each functional point of force on the board’s forward route. It plays the role of flat support for narrow boards, so that the boards will not warp or fall off.
18	CLAMPING MOVEMENT MECHANISM	The mechanism for lifting/lowering the clamping traverse is equipped with an electric drive, which ensures fast and accurate installation to the required thickness of the part.
19	EDGE BANDING EFFECT	The edge sealing effect of the edge banding strip is smooth and beautiful, with good wrapping properties and perfect chamfering.